You are using an outdated browser. Please upgrade your browser to improve your experience.
Evaluation version of MID WiFi and Marine Instrument Display.Marine Instrument Display WiFi allows you to create/follow/transfer routes, track your path, control autopilot, receive/store/forward NMEA0183 data over WiFi and see AIS targets on the map. Send/receive data through iCloud (e.g. remote anchor alarm).MID WiFi also features the world's first autopilot controller app for Apple Watch.Search "Marine Instrument Display" for Lite version.FEATURES- Compass Heading (mag/true) (HDG)- Clock (utc/local) (CLK)* Course Over Ground (COG)* Speed Over Ground (SOG)* Average SOG (ASOG)* Maximum SOG (MSOG)* Trip Distance (TRIP)* Trip Time (TIME)* Countdown Timer (CDT)* Distance to Line (DTL)* Time to Line (TTL) * Barometric Pressure (BPR) (NMEA or iPhone6->)* Bearing to Waypoint (BTW) * Distance to Waypoint (DTW) * Time to Waypoint (TTG) * Cross Track Error (XTE)* Velocity Made Good to Waypoint (VMGwpt)* Heeling (HLG)* Position** Apparent Wind Angle and Speed (AWA, AWS)** True Wind Angle and Speed (TWA, TWS)** Maximum Apparent/True Wind Speed (MAWS, MTWS)** True Wind Direction (TWD)** Velocity Made Good to Wind (VMGwnd)** Boat Speed (SPD)** Maximum Boat Speed (MSPD)** Depth (DPT)** Air and Sea Temperatures (AIR, SEA)** Predicted Boat Speed (PSPD)** Boat Speed to Predicted Boat Speed Ratio (SPR)** Revolutions Per Minute (Engine/Shaft) (RPM)** Propeller Pitch (PRP)** NoLand Eng. Analog Values (EAV1-5)** TackTick FFP1-4** Rate of Turn (ROT)** Fluid Levels (TANKS)* = Internal GPS or NMEA-WiFi bridge required** = NMEA-WiFi bridge required (e.g. Vesper Marine XB-8000 and WatchMate Vision, Simrad GoFree WIFI-1, RS232-WiFi, Digital Yacht iAIS/WLN10, ShipModul MiniPlex-2/3Wi, PilotsTech PilotPlug, iMux, Ockam LANbridge)WIND VIEW- Shows Apparent and True Wind Angles simultaneously - Size of the blue sector indicates the variation in wind direction- Red dot shows the BTWMAP VIEW- AIS targets (**- Create and follow routes- Transfer routes on NMEA- Create and replay tracks- Autopilot control (Raymarine, requires MiniPlex-3Wi) - Share tracks and data by email (GPX, NMEA)- Access stored NMEA data via iTunes File SharingALARMS- Depth (Deep, Shallow)- Anchor (Deep, Shallow, Distance)- Wind (AWA/TWA/AWS/TWS High/Low, TWD Shift)HOW TO USE- Tap the SET to enter the Settings page- Tap the value of any field to cycle through the color modes- Tap/swipe the title of any field (such as TIME) to select the data to the field- Tap a unit to cycle through the unit modes- Tap the unit (°) of the heeling (HLG) to calibrate (zero angle)- Press the value of any field at least two seconds to reset the TIME, ASOG, MSOG and TRIP- Rename a route or a track by tapping the name of it- Use IP address 255.255.255.255 for the UDP broadcast/multicast. The port for the Simrad GoFree discovery is 2050 or 2052, 5000-5010 are for Ockam LANbridge and 55554 for SailTimer Wind Vane.- Use 127.0.0.1 and port 55554 SailTimer Wind Instrument- NMEA0183 data can be forwarded as UDP multicast to other devices- The trip time runs while moving (SOG > 0)- The COG is shown while moving (SOG > 0)COUNTDOWN TIMER- Configure the start time (1 - 30 minutes) by touching the SET to enter the Settings view- Start/sync the timer by touching the "sync"- Stop the timer by touching the "sync" at least two seconds- The timer beeps every minute and when 50, 40, 30, 20, 10, 5, 4, 3, 2, 1, 0 second(s) are remainingCALIBRATION1. The back cover must be faced forward accurately in order to get the correct compass heading.2. Mount the iPhone/iPad securely and make sure it cannot move accidentally to ANY direction.3. Tap the unit field (°) of the heeling (HLG). HLG is set to zero and the heading shows the correct value.Continued use of GPS running in the background can dramatically decrease battery life.